塑性成形理論與實踐的創新

序
前言
第一篇 王仲仁教授的學術論文文選
　塑性理論
　　20世紀80年代初期中國的固體強度理論在金屬塑性成形中的重要應用成果
　　試論塑性加工的實質是“力處理”
　　論塑性加工中應變應力順序對應規律——兼評古布金的最小阻力定律
　　論應力偏量及應力張量第三不變量的物理意義及其在主應力空間中的幾何意義
　　廣義屈服準則
　　一點的三維剪應力圖及其與金屬變形類型的對應關系
　　主剪應力法及其在錐模薄管拉拔與縮頸中的應用
　　內壓橢球殼塑性變形的發生部位與擴展過程分析
　　三向應力Mohr圓的真實構成及剪應力作用方向的確定
　　偏應力張量第二及第三不變量在塑性加工中的作用
　　Hencky應力方程與主剪應力跡線上正應力方程的比較
　　三維最大剪應力跡線上的正應力變化規律
　　板料變形受壓失穩臨界條件分析
　　用嵌入螺柱法研究金屬塑性應變分布
　　A Consistent Relationship Between the Stress-and Strain-components and its Application for Analyzing the Plane-stress Forming Process
　　A New Method to Prove the Rule of Change of Normal Stress Along a Slip Line
　　Principal Shearing Stress Locus Theory of Axisymmetrically Plastic Flow
　　The Application of Strength Theories and Yield-criteria in Engineering
　　The Method of the Principal Shear Stress Tracing Line and its Application in the Flaring and Expanding of a Thin-walled Tube with a Conical Punch
　　Three-dimensional Representation of Normal Stress Magnitude with Applications to Hydrobulge Forming
　　Multiple-factor Dependence of the Yielding Behavior to Isotropic Ductile Materials
　　Graphical Methods of Representing the Stress Components on Dif{erent Inclined Planes at One Point
　　Comprehensive Analysis of Stress-Strain in Typical Metal Forming Processes
　液力成形
　　橢球殼體液壓成形的塑性變形規律的研究
　　無模脹球的原理與研究進展
　　單曲率多面殼體液壓脹球工藝
　　應力莫爾圓變化分析及其在典型液力塑性成形中的應用
　　內高壓成形起皺行為的研究
　　Experimental Research and Finite-element Simulation of Plates Hydrobulging in Pairs
　　Progress in Shell Hydroforming
　　Numerical Simulation of Plastic Deformation of Pressurized Oblate Spheroid Inscribed Single-Curvature Shells
　　Theoretical Analysis and Experimental Research into the Integral Hydro-bulge Forming of Oblate Shells
　　Hydroforming of Typical Hollow Components
　　The Integrally Hydro-forming Process of Pipe Elbows
　　Safety Analysis of 200m3 LPG Spherical Tank Manufactured by the Dieless Hydroulging Technology
　　Research on the Integral Hydrobulge Forming of Ellipsoidal Shells
　　Research into the Dieless Hydro-forming of Nonuniform Thickness Spherical Vessels
　　Experiment and Numerical Simulation of Hydro-forming Toroidal Shells with Different Initial Structure
　　Analysis of the Internal Pressure in Tube Hydroforming and Its Experimental Investigation
　　Effect of the Initial Structure on the Hydro-forming of Toroidal Shells
　新成形技術
多點“三明治”成形及其在風洞收縮段形體制造中的應用
板材數控增量成形過程的研究
粘性介質壓力成形的應用研究
管件電磁成形研究
等徑側向擠壓應變分析
Al-Li2091合金超塑成形／擴散連接工藝研究
鈦合金半球件超塑成形的數值模擬與實驗研究
用大尺寸粉末顆粒材料制備PM—SiCp/LYl2及其超塑性研究
靜液壓力下7075鋁合金圓環壓縮試驗研究
曲軸RR法鐓鍛成形的數值模擬與缺陷預測
脹形法加工聚碳酸酯板材制品的工藝參數研究
馬鞍形板材件多點“三明治”成形實驗研究
Multi Point Sandwich Forming
Spinning Conical Workpiece without Mandrel
Analysis of Blanking Vibration with Consideration of the Break-through State
Research into the Properties and Microstructure of ZA13 Alloy Tubes Formed by Liquid Extrusion
……
第二篇　業內專家對王仲仁教授學術貢獻的評價
第三篇　王仲仁創新與創業、科學研究及教書育人等方面的部分文章
第四篇　王仲仁教授相關報道
第五篇　附錄